SpeedyBee SB-STACK-F7V3-50A

Flight Controller:

• MCU: STM32F722

• IMU (Gyro): BMI270

• USB Port Type: Type-C

• Barometer: BMP280

• OSD Chip: AT7456E

• Bluetooth: Built-in for wireless configuration via SpeedyBee app

• Flash Memory: 500MB onboard Blackbox

• BetaFlight Camera Control Pad: Yes (CC pad on the front side)

• Power Input: 3S – 6S LiPo​Pyrodrone+3Robu+3Robu+3Robu+1Robu+1

ESC:

• Type: BLHeli_32 4-in-1 ESC

• Current Rating: 50A per ESC

• Firmware: BLHeli_32

• Power Input: 3S – 6S LiPo

• TVS Diode: For surge voltage protection

• Capacitors: Japan-made TDK SMT capacitors

• External Capacitor: 1500uF low ESR capacitor​Pyrodrone

Package Includes:

• 1 x SpeedyBee F7 V3 Flight Controller

• 1 x SpeedyBee BL32 50A 4-in-1 ESC

• 1 x DJI 6-pin Cable (80mm)

• 1 x SH 1.0mm 15mm-length 8-pin Cable (for FC-ESC connection)

• 5 x M3*8mm Silicone Grommets (for FC)

• 5 x M3*8.1mm Silicone Grommets (for ESC)

• 5 x M3*30mm Inner-hexagon Screws

• 5 x M3 Silicone O-Rings

• 5 x M3 Nylon Nuts

• 1 x 35V 1500uF Low ESR Capacitor

• 1 x XT60 Power Cable (70mm)

• 1 x 4-pin SH1.0 to 3+2pin JST1.25 FPV Cam Cable (30mm)

• 1 x 4-pin SH1.0 to 3+2pin JST1.25 FPV Cam Cable (60mm)

• 1 x 4-pin SH1.0 to 4-pin JST1.25 FPV Cam Cable (60mm)

• 1 x 4-pin SH1.0 Radio Receiver Cable (100mm)

• 1 x 4-pin SH1.0 to 4-pin SH1.0 Analog VTX Cable

• 1 x 6-pin SH1.0 GPS Module Cable without Connector on Another End (100mm)

• 1 x 6-pin SH1.0 GPS Module Cable Connector of Another End